Welcome to Agparts Warehouse Online.
Main
About Us
Latest News
Specials

PRODUCT MENU

- WCCO Belting
- Presswheels
- Kverneland Hay Spikes
- Delmhorst Mosture Meters
- Roller Chains, Leaf
Chains & Baler Chains
- Sprockets, Platewheels, Taper lock & Reverse Taper
- Bearings, Housings & Seals
- Pulleys & Belts
- Gerni Pressure Cleaners
- Davey Pumps
- Dolmar Chainsaws
- Dunlite Generators
- Jetstream
- Tools Hand & Air Operated
- Agparts Motors & Pumps
- Fire Equipment
- Onga
- Murray Mowers
- Tractor Parts & Accessories
- PTO Driveshafts, Clutches, Universal Joints & Componants
- Harvest Belting & Hay Equipment
- Air Seeder Hoses, Secondary Heads & Components
- Ground Engaging Tools
- Batteries, Car, Truck, Tractor & Industrial
- Britax Equipment
- Donaldson Filtration
- Hydraulic, Hoses, Fittings & Rams
- Transport Chain & Load Binders
- Fuel Pumps, Meters & Grease Guns
- Engines & Generators
- Safety Equipment
- Welding Equipment
- Clutches
- Consumables
- Specials
 
DRIVE SHAFT SAFETY



Use the implement only with the original driveline , which is compatible in length, power capacity, torque limiters or overrunning clutches, and shielding. The driveline and its torque limiter or overrunning clutch should only be used for their intended purpose.
Ensure that all driveline, tractor and implement shields are functional and in place before operation . Damaged or missing components must be replaced with original spare parts, correctly installed, before using the driveline.
Ensure that the driveline is securely attached to the tractor and the implement before operating.
Do not wear loose clothing, jewellery,hair, or anything which could get caught in the machine. Contact with rotating parts could cause serious injury or death.
Disengage the PTO, turn off the tractor engine and remove key before approaching the implement or performing maintenance work.
When used at night or in poor visibility , illuminate the driveline operating area during installation
Keep the driveline horizontal during handling to prevent the halves from sliding apart, which could cause injury or damage the shielding.
Always hitch the tractor to STATIONARY MACHINERY (pumps, elevators, generators, driers,etc. ),so that the telescoping tubes overlap by at least 1/3 of their length. If greater telescoping capability is required, contact Bondioli & Pavesi engineering.

The safety of the end user depends upon proper use and maintenance of the implement, tractor, and driveline, plus all related safety shielding. Information regarding correct driveline usage is included on the safety label and in the use and maintenance manual included with drivelines.

Safety labels and user's manuals in alternative languages are available to meet local requirements.

Read driveline manual , and the operator's manual for the implement, before using the machine.

Your safety depends upon this information.
 Agparts Top Links

Kverneland Hay Spikes


Agparts Safety Links

Driveshaft Safety

Belt Installation & Safety
Safety Equipment


Distributors For
Designed By Aaron Norrish
Agparts Warehouse P/L