Points, Sweeps & Chisels

---

No. 8A Keyhole Bolt-On Scarifier Point
Fits Connor Shea: Takes 1/2" csk plow B&N, CSK16.

No. 54 Bolt-On Sweep
Fits IHC, Vibrashank, Leon, Hesston, AFM & Morris, 43 degree Sweep 44.5mm (1 3/4") hole centres: Takes 2 x 7/16" csk plow B&N.

No. 101T Bolt on Sweep
Fits 43 Degree AFM, Gyral Penetrator & other 44.5mm (1 3/4") hole centres: Takes 2 x 7/16" or 1/2" csk plow B&N, CSK9 or CSK16. Also suits Gason 4185 (7/16 holes)

No. 202T Bolt-On Sweep
Fits 47 Degree IHC Vibrashank, Leon Hesston, Morris , Flexi-coil, Bourgault, Ezee-On, H/Bagshaw Scari-Seeder x 2 bolt edge-on tine only, and other 44.5mm (1 3/4") hole centres: Takes 2 x 7/16" or 1/2" csk plow B&N, CSK9 or CSK16.

No. 303T Glide -A -Wing Bolt-On Sweep
Fits 43 Degree AFM, Gyral Penetrator & other 44.5mm (1 3/4") hole centres: Takes 2 x 7/16" or 1/2" csk plow B&N, CSK9 or CSK16. Also suits Gason 4185 (7/16 holes)

No. 404T Glide-a-Wing Bolt-On Sweep
Fits 47 Degree IHC Vibrashank, Leon Hesston, Morris , Flexi-coil, Bourgault, Ezee-On, H/Bagshaw Scari-Seeder x 2 bolt edge on tine only & other 44.5mm (1 3/4") hole centres: Takes 2 x 7/16" or 1/2" csk plow B&N, CSK9 or CSK16.

43 Degree - Standard Style Chisel Plow Sweep
Fits 43 Degree Morris Magnum1, Allis Chalmers, Taylorway, IHC 4700 and other 57mm (2 1/4") hole centres: Takes 2 x 1/2" csk plow B&N, CSK17, CSK18 or CSK19. Takes 2 x 1/2" plow bolts at 57mm centres. Use bolt P/No. CSK17, CSK18 or CSK19

50 Degree - Standard Style Chisel Plow Sweep
Fits 50 Degree John Deere, Massey Ferguson, AFM, Hesston, Riteway, New Holland, Symonds, Morris Magnum 2, Connor Shea, Versatile, Yeomans, Noble, Friggstad, Gason, Eco-Till & other 57mm (2 1/4") hole centres: Takes 2 x 1/2" csk plow B&N, CSK17, CSK18 or CSK19

Horwood Bagshaw - Standard Style Chisel Plow Sweep
Fits Horwood Bagshaw Stubblemaster & 350 Scaribar (single bolt hole models only): Takes 7/16" & 5/8" csk plow B&N.

Shearer - Standard Style Chisel Plow Sweep
Fits 50 Degree Shearer Chisel Plows, Trashworker, Econodraft & Ford with 76.2mm (3") hole centres: Takes 2 x Special B&N, SH1 or SH2.

Shearer - Yeti Heavy Duty Style Chisel Plow Sweep
Fits 50 Degree Shearer Chisel Plows, Trashworker, Econodraft & Ford with 76.2mm (3") hole centres: Takes 2 x Special B&N, SH1 or SH2

Alfarm - Starndard Style Chisel Plow Sweep
Fits Alfarm Chisel Plows with 76.2mm (3") hole centres: Takes 2 x 5/8" csk plow B&N.

50 Degree - Penetrator Style Chisel Plow Sweep
Fits 50 Degree John Deere, Massey Ferguson, AFM, Hesston, Riteway, New Holland, Symonds, Morris Magnum 2, Connor Shea, Versatile, Yeomans, Noble, Friggstad, Gason, Eco-Till & other 57mm (2 1/4") hole centres: Takes 2 x 1/2" csk plow B&N, CSK17, CSK18 or CSK19.

50 Degree - Glide-A -Wing Chisel Plow Sweep
Fits 50 Degree John Deere, Massey Ferguson, AFM, Hesston, Riteway, New Holland, Symonds, Morris Magnum 2, Connor Shea, Versatile, Yeomans, Noble, Friggstad, Gason, Eco-Till & other 57mm (2 1/4") hole centres: Takes 2 x 1/2" csk plow B&N, CSK17, CSK18 or CSK19:

Gessner - Penetrator Style Chisel Plow Sweep
Fits Gessner Chisel Plows with 57mm (2 1/4") hole centres: Takes 2 x 5/8" csk plow B&N.

Shearer - Penetrator Style Chisel Plow Sweep
Fits 50 Degree Shearer Chisel Plows, Trashworker, Econodraft & Ford with 76.2mm (3") centres: Takes 2 x Special B&N, SH1 or SH2.

Feed Down Points
Fits Yeoman, Graham Hoeme and Napier-Grasslands. Use two WCK91 Clamps and set screws

No. 31CS Reversible Chisel Point
Fits Connor Shea (6-01327P1): Takes 1/2 " csk plow B&N at 63.5mm centres.

No. 31DJ Reversible Chisel Point
Fits J. Deere, Graham Hoeme, Morris, Gason-Hiniker, Versatile & most Nth. American machines at 57mm centres: Takes 7/16 " or 1/2 " plow B&N.

No. 31F Reversible Chisel Point
Fits Massey Ferguson, David Brown, Flexi-Coil Bourgault and most coil tines, hole and slot at 44.5mm to 51mm centres: Takes 7/16 " csk plow B&N.

No. 31H Reversible Chisel Point
Fits Howard (6-01328P1) 3 x 9/16 " holes at 50mm centres. Takes 9/16 " csk plow B&N.

No. 31JB Reversible Chisel Point
Fits John Berends, Jarrett, Yeomans & Bonel. 2 x 1/2" holes at 57mm centres.

No. 31M Reversible Chisel Point
Fits AFM, Morris, John Deere, Friggstad, Gason-Hiniker, Versatile, North American machines at 57mm centres: Takes 2 1/2 " csk plow B&N .

No. 31MH Reversible Chisel Point
Fits AFM, Morris, John Deere, Friggstad, Gason-Hiniker, Versatile, North American machines at 57mm centres: Takes 2 1/2 " csk plow B&N.

No. 31MG Reversible Chisel Point
Fits Gessner Chisel Plowat 57mm centres: Takes 5/8 " csk plow B&N.

No. 31SH Reversible Chisel Point
Fits Shearer, Trashworker & Econodraft at 76.2mm centres: Takes 2 x Special B&N, SH1 or SH2.

No. 31SHH Reversible Chisel Point
Fits Shearer, Trashworker & Econodraft at 76.2mm centres: Takes 2 x Special B&N, SH1 or SH2.

No. 31SL Reversible Chisel Point
Fits MF, Gibbins, McKay & Pioneer Coil Tines at 50mm centres: Takes 7/16 " csk plow B&N .

No. 31US Reversible Chisel Point
Fits Leon, Morris, IHC - Vibrashank, Hesston, Flexi-Coil, Bourgault etc at 44.5mm centres: Takes 7/16 " csk plow B&N.

No. 31VI Reversible Chisel Point
Fits Vicon Jumbo Buster. 3 x 1/2 " csk holes at 67mm centres.

No. 12640 Reversible Chisel Point
Fits McKay Coil tines, Leon, Morris, Hesston, IHC-Vibrashank, Flexi-Coil, Bougault etc. Hole and slot 44.5mm to 51mm centres: Takes 7/16 " csk plow B&N.

No. 61U Universal Bolt-On Point
Suits most makes of combines eg. Shearer, Ford, Gyral etc. 38 Degree Point: Takes special B&N, S4 to S6 or AG4 to AG8 & N538 washer.

No. 61N Bolt-On Point
Fits Alfarm, Napier etc. 40 degree Point:Takes special B&N, S4 to S6 or AG4 to AG8 & N538 washer.

No. 62 Bolt-On Point
Fits MF, IHC & Ackland: Takes special B&N, S1, S2 or AG1 or AG2 & N538 washer.

No. 63 Bolt-on Point
Fits MF, Chamberlain etc.35 Degree Point: High Breasted Style: Takes special B&N, S1, S2 or AG1 or AG2 & N538 washer.

No. 64A Bolt-On Point
Fits most fluted tines, Reversible: Takes special B&N, S2 to S4 or AG2 to AG4 & N538 washer.

No. 64 Bolt-On Point
Fits most fluted tines, Reversible: Takes special B&N, S2 to S4 or AG2 to AG4 & N538 washer.

No. 65 Bolt-On Point
Fits most fluted tines, Lucerne chisel: Takes special B&N, S2 to S4 or AG2 to AG4 & N538 washer.

No. 715 Bolt-On Point
Fits various tines, Aqua point: Takes special B&N, S4 to S6 or AG4 to AG8.

No. 74A Bolt-On Point
Fits Horwood Bagshaw Combine: Takes special headed B&N & use N538 washer.

No. 15780 Bolt-On Point
Fits Konskilde "S" spring tines: Takes 3/8" Marlow B&N, MB1 & N538 washer

16308 Series Bolt-On
Fits Ackland, Shearer, Gason and others with 46 degree sweep for a 49 degree tine: Takes 7/16" Crushed Cuphead B&N: S4 to S6 or AG4 to AG8.

M1 Marlow Point Slip-On Type
Fits M.F., Chamberlain etc.43 Degree Slip-On:Takes special Marlow Clip & Bolt Assy.

M2 Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, 46 degree Slip-On (Steeper set than M3): Takes Special Marlow Clip and Bolt Assy.

M2T 6mm Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, 46 degree Slip-On (Steeper set than M3): Takes Special Marlow Clip and Bolt Assy.

M2LP Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, Lucerne Point (LP= 6" in length) (LPL = 7" in length): Takes Special Marlow Clip and Bolt Assy.

M2SP Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, Seeding Point 6 " long x 20mm wide: Takes special Marlow Clip & Bolt Assembly.

M2PP Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, Pastue Point 6 " long x 35mm wide: Takes special Marlow Clip & Bolt Assembly.

M3 Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, 49 Degree Slip-On Point (Flatter set than M2) Takes special Marlow Clip & Bolt Assembly.

M3T 6mm Marlow Point Slip-On Type
Fits most makes of combines or cultivators with fluted or similar foot, 49 Degree Slip-On Point (Flatter set than M2) Takes special Marlow Clip & Bolt Assembly.

M4 Marlow Point Slip-On Type
Fits Connor Shea Wideline cultivator, 52 Degree Slip-On: Takes Special MC21193 clip & MB1 B&N.

M5 Slip-On Type Sweep
Fits early model John Deere 1000 series with 3/8 " holes, White, Gason 5100, M.F.259 & Versatile cultivators, Slip-On Sweep - 43 Degree(Steeper set than M6 & M7): Takes clip 15336 or 15552.

M6 Slip-On Type Sweep
Fits IHC-Vibrashank & Hesston cultivators & John Deere with slotted hole, Slip-On Sweep - 50 Degree(Flatter set than M5 & M7): Takes clip 15336 or 15552.

M7 Slip-On Type Sweep
Fits Nth American field cultivators, Flexicoil, Morris, IHC Vibrashank, Bourgault & Horwood Bagshaw Scaribar, Slip-On Sweep - 47 Degree: Takes clip 15336 or 15552.

M8T Long Neck Slip-On Type Sweep
Fits Nth American field cultivators, Flexicoil, Morris, IHC Vibrashank, Bourgault & Horwood Bagshaw Scaribar, Gason 6100, Slip-On Sweep - 47 Degree: Takes cast clip 15554 or 15556.

Marlow Clips
Takes Special AG Series bolt & nut available in either 3/8 " or 7/16 " diameter. Must be fitted with a spring washer and not tightened beyond 60 ft/lb. Do not lubricate the bolt!!

M4 Marlow Clip
Fits Connor Shea Wideline and cultivators, Clip to suit M4 Point: Takes Special MB1 bolt & nut with N538 Clip.

No. 15552 Clip
Fits IHC-Vibrashank, Hesston, Gason, Hiniker, MF259, Flexi-Coil, AFM, Versatile, Bourgualt & John Deere, with 44.5mm (1 3/4") hole centres: Takes 2 x 7/16" or 1/2" csk plow B&N.

No. 15554 & 15556 Clip
Slim Wedge Sweep Clips for M8T Series sweeps

Slimline Points
To fit all Slimline tines ie. Alfarm, Gason & Symonds.

Soil Buster
Heavy Duty Soil Buster: 5/8" slotted hole for 50mm to 90mm centres.

Ripper Points
Fits Various

Tine Clip & Bolt
Fits Various Tines

Tine Washer
Fits Various Fluted Tines

Agparts Top Links

Agparts Motors & Pumps WCCO Belting Kverneland Hay Spikes Delmhorst Mosture Meters Presswheels Roller Chains, Leaf Chains & Baler Chains Gerni Pressure Cleaners Davey Pumps

Agparts Safety Links

Driveshaft Safety Belt Installation & Safety Safety Equipment

Distributors For