Fits rigid tines TI8-07599 & TI42-01657. 2 x 3/8" hole & Slot to suit 32mm to 57mm hole centres.

Hoe Blades

Fits 1 1/4" rigid tines TI8-05011. 2 x 13.5mm holes to suit 38mm hole centres

Multiweeder Rakes

Fits Various

Multiweeder Tracking Rakes

Fits Various

V Frame Rakes

Fits Various

Cultivator Rakes

Fits Various

Cotton Rake Tines

Fits Various

Beet Hoe Blades

Fits 1 1/4" Rigid Tines TI2-01536. 2 x 3/8" holes on 57mm centres

Crescent Hoe Blades

Fits 1 1/4 " rigid tines T18-07599 & T142-01657. 2 x 3/8 " hole & slot to suit 32mm to 57mm hole centres.

Friction Trip & Hardware Kit

Use with shank TI8-01537

Alabama Sweeps

High Crown, 57mm (2 1/4 ") hole centres. Use 1/2 " csk plow B&N

High Wing Furrowers & Point To Suit

3 x 7/16 " holes on 44.5mm & 57mm centres. Use with TI2-5210 furrower tine.

Disc Weeder Assembly and Parts

Fits various applications. Use tine TI8-01620

Clamps To Suit Imperial RHS

Various Size Toolbars.

Clamps To Suit Metric RHS

Various Size Toolbars.

Spreader Bar Clamps - Imperial (No Tine Used)

Various Size Toolbars.

Spreader Bar Clamps - Metric (No Tine Used)

Various Size Toolbars

Clamp Assemblies

Various Size Toolbars.

Wedges

Various Tine & Clamp Combinations.

Coil Tines-Square Bar

2 x 7/16 " hole & slot at 46mm - 53mm centres. Tines are identified by standing at the rear of the implement and looking in the direction of travel. Coil on the LH of the leg = LH Tine.

Massey Ferguson Coil Tines-Diamond Bar

Massey Ferguson Coil Tines. 2 x 7/16 " hole & slot at 46mm - 53mm centres.

Rigid Tines

2 x 7/16 " hole & slot at 46mm - 53mm centres for Chisel Points

Friction Trip Shanks

3/4 ", 5/8 " holes at 115mm centres for Friction Trips

Rowcrop Cultivator Shanks

Various Size Toolbars

Chisel Plow Tines

Various Chisel Plows

Spring Tine and Helper

Fits Case IH & MF & various combines and cultivators using 3/8" bolt.

Fluted Tine

Fits various combines and cultivators using 3/8" bolt.